Leak detection in Sydney from Elite Restoration finds a hidden leak, marks the spot so it can be repaired without guesswork, and then deals with the water already in the building. The Sydney branch is in Seven Hills, 26.6 km from this area, with emergency call-out 24/7 and a target of on site within 2 hours in metro areas.
Quiet signs come first: a water bill out of line with the last one, the meter turning while the house sleeps, a bubble in the paint, a tile that has started to sound hollow.
“We had a pipe burst in our ceiling, water seeped into our walls and our unit was at a very high risk for mould :( Guosheng worked tirelessly to ensure the drying process went as smooth as possible, even working until the evening on a Friday to ensure our walls would be dry and safe over the weekend! An extremely proficient and productive company that thrives on providing excellent service and quality work. Thank you so much for all of your help! <3”
“Guosheng from Elite Restoration did an amazing job dealing with the water damage to my unit, due to a burst pipe. Nothing was too hard and Guosheng had multiple tricks up his sleeve to ensure maximum drying capacity. The communication throughout the whole process was excellent, which made this very stressful situation for me a lot easier to handle. Thanks so much Guosheng.☺️”
Your account. What you have seen, where, and since when.
Meter and pressure. The meter shows whether water is escaping; pressure testing one section at a time shows where it is being lost.
The search. Sound on a pressurised line, temperature on a wall or slab, moisture readings to show the spread. The spot is marked for the repair.
Report and dry. An initial report and scope within 24 hours, then drying in line with IICRC S500 once the leak is fixed, monitored on alternate days until dry.
In July 2026 a Gosford house needed full remediation in the kitchen and dining area after an overflowing hot water system, the sort of damage that grows the longer a leak stays hidden.
Across Sydney
Balmain, Glebe, Annandale, Darlinghurst, Double Bay, Bondi, Bronte and Coogee in the east and inner west; Chatswood, Crows Nest, Gordon, Hornsby and Asquith on the North Shore; Brookvale, Dee Why and Avalon on the northern beaches; Baulkham Hills, Castle Hill, Blacktown, Glenmore Park and Blackheath to the west; Granville, Auburn, Bankstown, Fairfield and Cabramatta in the middle ring; and Camden, Campbelltown, Caringbah and Cronulla to the south.
The people and the cover
IICRC-certified technicians in water damage restoration and applied structural drying, from an IICRC Certified Firm, certificate 70100265. CM3 certified, with $20 million in public and products liability cover and direct insurance liaison from first call to final sign-off.
Sydney leak detection questions
How do I check for a leak myself?
Turn everything off, note the meter reading, and check it again an hour later without using any water. A change means a leak.
Can a leak under a slab be found?
Often. A pressurised line under concrete gives itself away by sound and by the temperature of the floor above it, and moisture readings confirm it.
Who is responsible for a leak before the meter?
Generally the water authority looks after the pipes up to the meter, and the owner looks after the rest. Your water authority can confirm it for your property.
Recent case studies
Water Leak Detection — Manly
Completed February 2026 · property · Job SM8-11188
10 rooms documented
A water leak from a kitchen fitting was assessed, and floorboards were found to be damaged.