Mould removal in Launceston works best when it’s treated as a moisture job. We trace where the water is getting in, contain the area, take out what can’t be saved, treat the rest and dry the structure.
Small, occasional spots in a bathroom are usually fine to clean yourself. Mould that keeps returning, covers a large area, follows a leak, or affects someone with asthma or allergies should be looked at by a professional.
Google4.6★★★★★★★★★★100+ reviews
What's included
Mould Inspection & Air Quality Testing
IICRC-aligned inspection with moisture mapping, indoor air quality sampling, and documented findings for stakeholders and insurers.
Containment & HEPA Filtration
Negative-pressure containment, HEPA-filtered air scrubbers, and worker decontamination protocols for safe in-situ remediation.
Surface Treatment & Post-Remediation Verification
Antimicrobial application followed by post-remediation verification testing to confirm clearance against project specifications.
“We had a pipe burst in our ceiling, water seeped into our walls and our unit was at a very high risk for mould :( Guosheng worked tirelessly to ensure the drying process went as smooth as possible, even working until the evening on a Friday to ensure our walls would be dry and safe over the weekend! An extremely proficient and productive company that thrives on providing excellent service and quality work. Thank you so much for all of your help! <3”
“Guosheng from Elite Restoration did an amazing job dealing with the water damage to my unit, due to a burst pipe. Nothing was too hard and Guosheng had multiple tricks up his sleeve to ensure maximum drying capacity. The communication throughout the whole process was excellent, which made this very stressful situation for me a lot easier to handle. Thanks so much Guosheng.☺️”
Mould remediation is never a simple clean. Under the
IICRC S520 Standard for Professional Mould Remediation,
treating mould without a proper inspection risks missing the underlying
moisture source and leads to recurrence. Every mould job starts with a
professional inspection by S520-certified technicians, so containment,
controls and the remediation scope are set correctly from day one.
Inspection from $350 inc. GST. Remediation is scoped and
quoted separately, only after the inspection.
Find the cause — identify the moisture source so remediation actually holds.
Set containment — protect unaffected areas during the work.
Clear scope & documentation — written report you can give insurers or strata managers.
Want to know exactly what you’ll receive? Download a real example of the
written report our S520-certified technicians produce after a mould
inspection — findings, moisture readings, photos and the recommended
remediation scope.
The process follows IICRC S520 from start to finish.
We inspect and identify the moisture source.
The affected room is contained to keep spores from spreading.
Unrecoverable materials are removed.
Surfaces are treated and the building is dried.
A completion report follows within 24 to 48 hours.
Scopes and quotes are written live on site, with an initial report within 24 hours. In July 2026 a leaking pipe damaged the bathroom and toilet of a house in Blackstone Heights, and make-safe drying was carried out there. That kind of hidden leak is a common starting point for mould.
What to expect while we work
Only the contained area is off limits during the job, so in most homes daily life carries on in the other rooms. Drying equipment may run for a few days, and we check progress on alternate days rather than leaving it to chance. Rooms go back into use once the drying is confirmed and the completion report is issued. If the inspection shows sample testing would help, it’s done through our NATA-accredited laboratory partners.
In our customers' words
“Guosheng from Elite Restoration did an amazing job dealing with the water damage to my unit, due to a burst pipe. Nothing was too hard and Guosheng had multiple tricks up his sleeve to ensure maximum drying capacity.” That’s from a Google review by Nicole Martin, and drying is exactly the part of a mould job that stops it coming back.
Where this page covers
This page serves Launceston along with Beaconsfield, Legana and Riverside, plus the areas around Kings Meadows and Newnham. Emergency mitigation call-outs are available 24/7, 365 days a year.
What you can count on
Work is carried out in line with IICRC S520, and Elite Restoration is an IICRC Certified Firm. We’re also CM3 certified for contractor safety and compliance, and part of the Elite brand, operating since 1984. On an insurance job we liaise with insurers on the claim, and our 7-day end-of-loss project life cycle aims to close the loss out end to end.
Launceston mould questions
Do you cover Legana, Riverside and Beaconsfield?
Yes, along with Launceston itself, Kings Meadows and Newnham. Emergency mitigation call-out is available 24/7, 365 days a year.
Do you work on shops as well as houses?
Yes. In October 2026 we worked on a shop in Launceston, and the business is CM3 certified for contractor safety and compliance.
A bathroom leak has started mould. What happens first?
The water is dealt with first. In July 2026 a leaking pipe damaged the bathroom and toilet of a house in Blackstone Heights, and make-safe drying was carried out there. Once the source is stopped, the remediation runs in line with IICRC S520.
Will you deal with my insurer?
Yes. Where the mould follows an insured event, we liaise with your insurer from the first call to the final sign-off.
Recent case studies
Mould Removal & Remediation — Newnham
Completed August 2025 · house · Job SM8-9282
9 rooms documented
Mould inspection with air samples was conducted inside and outside a house.
