Mould removal in Coffs Harbour means more than a scrub. Remediation identifies the moisture source, contains the affected space, takes out material that can’t be recovered, treats the surfaces left behind and dries the structure.
Not every mark is an emergency. Light growth in a bathroom is usually handled with ventilation and a clean, while spreading or recurring mould, or mould in a home with someone who has asthma, needs a proper look.
Google4.6★★★★★★★★★★100+ reviews
What's included
Mould Inspection & Air Quality Testing
IICRC-aligned inspection with moisture mapping, indoor air quality sampling, and documented findings for stakeholders and insurers.
Containment & HEPA Filtration
Negative-pressure containment, HEPA-filtered air scrubbers, and worker decontamination protocols for safe in-situ remediation.
Surface Treatment & Post-Remediation Verification
Antimicrobial application followed by post-remediation verification testing to confirm clearance against project specifications.
“We had a pipe burst in our ceiling, water seeped into our walls and our unit was at a very high risk for mould :( Guosheng worked tirelessly to ensure the drying process went as smooth as possible, even working until the evening on a Friday to ensure our walls would be dry and safe over the weekend! An extremely proficient and productive company that thrives on providing excellent service and quality work. Thank you so much for all of your help! <3”
“Guosheng from Elite Restoration did an amazing job dealing with the water damage to my unit, due to a burst pipe. Nothing was too hard and Guosheng had multiple tricks up his sleeve to ensure maximum drying capacity. The communication throughout the whole process was excellent, which made this very stressful situation for me a lot easier to handle. Thanks so much Guosheng.☺️”
Mould remediation is never a simple clean. Under the
IICRC S520 Standard for Professional Mould Remediation,
treating mould without a proper inspection risks missing the underlying
moisture source and leads to recurrence. Every mould job starts with a
professional inspection by S520-certified technicians, so containment,
controls and the remediation scope are set correctly from day one.
Inspection from $350 inc. GST. Remediation is scoped and
quoted separately, only after the inspection.
Find the cause — identify the moisture source so remediation actually holds.
Set containment — protect unaffected areas during the work.
Clear scope & documentation — written report you can give insurers or strata managers.
Want to know exactly what you’ll receive? Download a real example of the
written report our S520-certified technicians produce after a mould
inspection — findings, moisture readings, photos and the recommended
remediation scope.
We work in line with IICRC S520, and the team includes technicians holding IICRC certification in applied microbial remediation.
Inspect the property and pinpoint where moisture is coming from.
Contain the work area before disturbing any growth.
Remove affected plasterboard, ceiling linings or underlay that can’t be saved.
Apply an antimicrobial treatment to what remains.
Dry the structure, checking progress on alternate days.
Close out with a completion report within 24 to 48 hours of finishing.
Before any of that, you’ll receive an initial report and a scope or quote within 24 hours, so you can see what will be removed and why.
Moisture and mould on the Coffs coast
A humid coastal climate means damp doesn’t dry out on its own as quickly. A leaking roof, a failed shower seal or a burst pipe can keep a wall cavity wet long enough for mould to settle in. If the growth is cleaned off while the cavity stays damp, it comes straight back. Drying the building and fixing the leak is what makes the result last.
As Nicole Martin wrote in a Google review about a burst-pipe job: “Nothing was too hard and Guosheng had multiple tricks up his sleeve to ensure maximum drying capacity.”
Backed by the Elite brand
Elite Restoration is part of the Elite brand, operating since 1984, and an IICRC Certified Firm. We carry $20 million in public and products liability cover and liaise with insurers where the mould follows an insured event. Every remediation follows IICRC S520.
If you’re not sure whether you’re looking at mould or just staining, testing can help. Samples are sent to NATA-accredited laboratory partners, and the result shapes what goes into the scope. We’re also CM3 certified for contractor safety and compliance, which matters to property managers and body corporates as much as to homeowners.
This page covers Coffs Harbour along with Bellingen, Nambucca Heads, Sawtell, Toormina and Woolgoolga.
Coffs Harbour mould questions
Do you come out to Bellingen and Woolgoolga?
Yes. This page covers Coffs Harbour, Sawtell, Toormina, Woolgoolga, Bellingen and Nambucca Heads, and emergency mitigation call-out is available 24/7, 365 days a year.
Does a unit mean the whole building is disrupted?
No. Only the work area is contained, and the rest of the unit stays in use. In August 2026 we remediated a unit in Coffs Harbour.
What is in the scope before work starts?
An initial report and a scope or quote within 24 hours of the inspection, listing what will be removed and why. Reporting continues live on site, and a completion report follows 24 to 48 hours after the work ends.
Do you deal with strata and property managers?
Yes. The business is CM3 certified for contractor safety and compliance, carries $20 million in public and products liability cover, and liaises with insurers where the mould follows an insured event.
Recent case studies
Mould Removal & Remediation — Cobram
Completed March 2026 · house · Job SM8-11274
13 rooms documented
A full house mould inspection was conducted, revealing mould under carpet and vinyl.
